•Microprocessor controlled
•Shell & tube type evaporator
•Hydronic kit optional
Usage areas;
•Air-conditioning systems
•Process cooling
•Plastic,chemical,food,textile industries
•For different purposes
The cooling capacities of compact units in our plant range from 67 kW to 638 kW.
1,2 or 4 semi-hermetic reciprocating compressors are used according to the capacity.It can work according to all gases.Easy to maintain and long lasting.
Condenser:
It is produced as high efficiency copper tube and aluminum lamella. The unit is calculated by special
program according to the climatic conditions to be studied.The high-quality axial fan according to the
capacity allows condensation of the refrigerant flowing through it.
Evaporator:
Shell&tube type producing, a special high-efficiency copper tubing with steel mirror is determined to
holes by tube expander. The outer body is insulated with special rubber insulation.
Electrical Control Panel:
Control of the system is carried out through this board.It is equipped with suitable capacity and
number of switches, contactors, thermal, fuse, switch and similar electric shafts for fully automatic
operation of the system.
Cooling Circuit Elements:
Dryer, sight glass, electronic expansion valve, solenoid valve, pressure proceses, flow-switch, cooling valves,
water and air discharge valves are used for proper operation of the system.
Microprocessor Control Unit:
The microprocessor control unit controls the water inlet and outlet temperature values and possible fault conditions in the system. In addition, the operating hours of the compressors are automatically compensated.
1 – Values are based on evaporator entering/leaving eater temp. 12°C/7°C and ambient temperature 30°C.
2 – Values are based on freefield conditions in 10 meter distance.
